You are here: Home / Products / stone machines / processing cnc Stone Machinery for cutting factory
Share to:

processing cnc Stone Machinery for cutting factory

The headstock of machine moves flexibly in three directions, up & down, left & right, forward & backward (in axis X,Y,Z) It is wide-span structure, equipped with 0-360 degree rotary table. The vertical stroke of machine makes speed adjustment easier.
It is an ideal machine for processing small block, especially for tombstone or monument.
Quantity:
  • QZQ-900/1200/1400/1600
  • WANLONG

QZQ-900/1200 Bridge Cutting Machine:

The headstock of machine moves flexibly in three directions, up & down, left & right, forward & backward (in axis X,Y,Z) It is wide-span structure, equipped with 0-360 degree rotary table. The vertical stroke of machine makes speed adjustment easier. 

It is an ideal machine for processing small block, especially for tombstone or monument.

 

Configurations:

1. SIEMENS main motor with stronger seats.

2. PANASONIC PLC and inverter.

3. Encoder for X, Y, Z movement.

4. Strong cast iron HT200.

5. Touch sensitive Panel Easy for worker to operate.

6. 80-90sqm/ 10hrs for medium hard granite with 140-150mm thicknes.

 

Technical Parameters:

Model


QZQ-900

QSQ-1200

Max. diameter of blade

mm

φ600 - φ900

φ1000 - φ1200

Main motor power

kw

18.5

18.5

Blade vertical stroke

mm

500

500

Table dimensions ( L x W )

mm

3000 x 1600

3000 x 1600

Cutting table rotation range

0 - 360°

0 - 360°

Max. cutting size ( L x W x H )

mm

3000 x 1600 x 300

3000 x 1600 x 450

Overall dimension ( L x W x H )

mm

6000 x 5000 x 4200

6000 x 5000 x 4200

Water consumption

m³/h

4

4

Approximate weight

mm

6000

6500



QZQ-900-1200(750_01


The operating procedures of the stone cutting machine:

The stone cutting machine is composed of a cutting knife set, a stone conveying table, a positioning guide plate and a frame. The stone cutting machine is made of iron, suitable for dry cutting and wet cutting of various types of stone, building materials, ceramic tiles, granite, marble, cement board, red brick, refractory Bricks, etc., are a must-have tool for home decoration.


The stone cutting machine can cut stones at different depths, and can process stones less than 1m3, which can turn waste into treasure, greatly save stone resources, and also help protect the environment. Various types of stone can be machined Cutting processing, high processing efficiency, coupled with the effective use of small stones, make the production cost lower.


A multi-knife multi-stage stone cutting machine consisting of a cutting knife group, a stone conveying table, a positioning guide plate and a frame. The cutting knife group is placed on the upper part of the stone conveying table and placed on the frame, and the positioning guide plate is fixed between the cutting knife groups; The cutting knife group is composed of a motor, a belt, a cutter wheel shaft, and a cutting tool. The cutting tool is fixed on the cutter wheel shaft. This kind of stone cutting machine can cut stones with different depths respectively, and can process stones less than 1m3, which can turn waste into treasure, greatly save stone resources, and also help protect the environment. Various types of stones can be mechanically cut, and the processing efficiency is high. In addition, the effective use of small stones makes the production cost lower.


Because the linear motor drive of the portable stone cutting machine is the same part as the main shaft, there is no screw connection, no backlash, and accurate movement. The portable stone cutting machine achieves high response and high tracking, and high-precision position control to prevent wire breakage. The stable processing that can maintain the best discharge state improves the discharge efficiency and processing accuracy of the portable stone cutting machine, and overcomes the surface streaks in the wire cutting process.


The stone cutting machine uses linear motor drive technology. Japan's Sodick company first adopted linear motor drive on portable stone cutting machine tools. At the 7th Beijing International Lightweight Stone Cutting Machine Tool Exhibition in 2001, it introduced the AQ550L linear motor driven portable stone cutting machine.

The CAD/CAM technology of stone cutting machine cutting processing has been further improved. After years of development and research, the portable stone cutting machine has been able to use the computer to draw pixel maps of parts, automatically program, and control the processing trajectory. In recent years, the portable stone cutting machine has integrated CAD and CAM modules together to form a CAD/CAM system from pixel graphic input to processing control. Some portable stone cutting machines have also developed a more complete CAD/CAM system including optimization and selection of process parameters based on the establishment of a process database.


QZQ-900-1200(750_03

Related Articles

content is empty!

GET IN TOUCH