You are here: Home / Products / stone machines / fabrication cnc Stone Machinery for cutting manufactuer
Share to:

fabrication cnc Stone Machinery for cutting manufactuer

The elevation of blade is driven by crossbeam to increase the cutting flatness and processing scope Sliding speed of blade on the crossbeam is adjustable.
Quantity:
  • LMQ-3850/4850
  • WANLONG

LMX-3850/4850 Block Squaring Cutter:

The elevation of blade is driven by crossbeam to increase the cutting flatness and processing scope Sliding speed of blade on the crossbeam is adjustable.

Model  Unit  LMX-3850 LMX-4850
Blade diameter mm 1200-1600 1200-1600
Main motor power KW 30 30
Table dimensions(L x W) mm 2000*2000 2000*2000
Table rotating degree 0-360° 0-360°
Max. cutting size(L x W x H) mm 3000*3000*2000 3800*4000*2000
Overall dimensions(L x W x H) mm 6700*6000*5500 7500*6000*5500
Water consumption m3/h 6 6
Approximate weight Kg 10000 10500


Features:

1 SIEMENS main motor
2 PANASONIC PLC and Inverter
3 FUJI contactor
4 Stong cast iron HT200 to avoid distortion after long run
5 Touch Senstive Panel Easy for worker of not high education to operate.
6 40-48sqm/10hrs for medium hard granite.



LMX-3850(750)


How to use the cutting machine correctly?


(1) Before operation, first check whether the power supply voltage is consistent with the rated voltage of the cutting machine, whether the switch is sensitive and effective, and whether the cutting disc is intact, and it can be turned on after confirming that it is correct.


(2) Adjust the cutting depth. Loosen the wing nut on the depth gauge and move the platform board up and down, and tighten the wing nut at a predetermined depth to fix the platform board.


(3) Install cold water pipes. Loosen the wing nut that fixes the pipe clamp, connect the nylon tube to the water pipe, and tighten the wing nut to clamp the water pipe with the pipe clamp. Then connect one end of the nylon tube to the cock, and connect the other end to the faucet with a connector. Turn on the faucet and adjust the cock to adjust the water volume.

(4) To start the cutting machine, just press the handle switch. Release the handle switch tool to stop rotating. To make the cutting machine rotate continuously, press the handle switch and then press the lock button.


(5) When adjusting the platform board, the front edge of the platform board of the cutting machine should be aligned with the cutting line on the workpiece.

(6) Adjust the water flow, hold the handle of the machine firmly, place the bottom plate of the tool on the workpiece to be cut without contacting the cutting piece with the workpiece, and then start the machine. The standby tool reaches the rated speed before it can move forward slowly along the surface of the workpiece. The advancement of the machine tool should be maintained at a basic level, the cutting edge should be straight and smooth, and the forward speed should be uniform. Stop the operation and wait for the cutting blade to completely stop rotating before removing the tool to avoid damage to the saw blade. The stone cutting machine can only be used for horizontal straight cutting, not for vertical or curved cutting.


机械描述下(新20_03机械描述下(新20_02工具描述下(新2019)_03抛光盘描述_09机械描述下(新20_07


Related Articles

content is empty!

GET IN TOUCH