Availability: | |
---|---|
Quantity: | |
YTQQ-500/600
WANLONG
Model | Unit | YTQQ-500 | YTQQ-600 |
Max. diameter of blades | mm | φ500 | φ600 |
Max. motor power | kw | 15/18.5 | 15/18.5 |
cutting head rotating degree | n° | 90° | 90° |
table dimension ( L x W ) | mm | 3200 x 2000 | 3200 x 2000 |
table tilting degree | n° | 0-85° | 0-85° |
Max. Cutting Size(L x W x H) | mm | 3000 x 2000 x 130 | 3000 x 2000 x 180 |
Overall dimensions(L x W x H) | mm | 5800 x 3000 x 2900 | 5800 x 3000 x 3000 |
Water Comsuption | m³/h | 4 | 5 |
Approximate weight | Kg | 6000 | 6500 |
This is a PLC controlled slab cutting machine which adopts a integrated steel base, so concrete base is not need for this model and its easy to be installed or moved. The saw is equipped with a laser illumination system to aid in lining up the cut. It’s blade head can be rotated at 0-90 degree .
Features:
1. SIEMENS or indigenous main motor, 15KW.
2. PANASONIC PLC, PANASONIC converter, FUJI contactor
3. Adopts encoder for forward & backward slicing
4. Top quality laser device with longer life and brightness
5. Using linear guide rail for side beams
6. Blade can rotate 90 degrees automatically
6. Worktable can tilt 85 degrees, and rotate 360 degrees automatically
What are the precautions for using the cutting machine?
(1) In most cases, the cutting machine should be operated with water. As a protective measure against electric shock, rubber gloves and rubber boots should be worn during the operation.
(2) Before operation, check carefully whether there are cracks or damages on the cutting blades. If there are cracks or damages, replace them immediately. Use accessories that match the tools, such as flanges.
(3) Do not damage the rotating shaft, flange (especially the mounting surface) and bolts. Damage to these parts will cause damage to the cutting blade.
(4) Hold the handle of the cutting machine tightly when working, and it is strictly forbidden to touch the rotating part. At the same time, it is necessary to prevent cooling water from entering the motor. Water entering the motor may cause electric shock.
(5) It is strictly forbidden to start the cutting machine with load. Before starting, make sure that the cutting piece is not in contact with the workpiece.
(6) It is forbidden to fix the switch of the cutting machine in the "ON" position for a long time.
Model | Unit | YTQQ-500 | YTQQ-600 |
Max. diameter of blades | mm | φ500 | φ600 |
Max. motor power | kw | 15/18.5 | 15/18.5 |
cutting head rotating degree | n° | 90° | 90° |
table dimension ( L x W ) | mm | 3200 x 2000 | 3200 x 2000 |
table tilting degree | n° | 0-85° | 0-85° |
Max. Cutting Size(L x W x H) | mm | 3000 x 2000 x 130 | 3000 x 2000 x 180 |
Overall dimensions(L x W x H) | mm | 5800 x 3000 x 2900 | 5800 x 3000 x 3000 |
Water Comsuption | m³/h | 4 | 5 |
Approximate weight | Kg | 6000 | 6500 |
This is a PLC controlled slab cutting machine which adopts a integrated steel base, so concrete base is not need for this model and its easy to be installed or moved. The saw is equipped with a laser illumination system to aid in lining up the cut. It’s blade head can be rotated at 0-90 degree .
Features:
1. SIEMENS or indigenous main motor, 15KW.
2. PANASONIC PLC, PANASONIC converter, FUJI contactor
3. Adopts encoder for forward & backward slicing
4. Top quality laser device with longer life and brightness
5. Using linear guide rail for side beams
6. Blade can rotate 90 degrees automatically
6. Worktable can tilt 85 degrees, and rotate 360 degrees automatically
What are the precautions for using the cutting machine?
(1) In most cases, the cutting machine should be operated with water. As a protective measure against electric shock, rubber gloves and rubber boots should be worn during the operation.
(2) Before operation, check carefully whether there are cracks or damages on the cutting blades. If there are cracks or damages, replace them immediately. Use accessories that match the tools, such as flanges.
(3) Do not damage the rotating shaft, flange (especially the mounting surface) and bolts. Damage to these parts will cause damage to the cutting blade.
(4) Hold the handle of the cutting machine tightly when working, and it is strictly forbidden to touch the rotating part. At the same time, it is necessary to prevent cooling water from entering the motor. Water entering the motor may cause electric shock.
(5) It is strictly forbidden to start the cutting machine with load. Before starting, make sure that the cutting piece is not in contact with the workpiece.
(6) It is forbidden to fix the switch of the cutting machine in the "ON" position for a long time.
content is empty!