You are here: Home / Products / DIAMOND TOOLS / DIAMOND SAW BLADE / Universal Diamond Saw Blade Laser Welded Diamond Saw Blade
Share to:

Universal Diamond Saw Blade Laser Welded Diamond Saw Blade

Dry cutting blade
Quantity:
  • WANLONG

CONSTRUCTION SAW BLADE 

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade CONSTRUCTION SAW BLADE

Cutting parameters of diamond saw blades


The feed speed bai is the feed speed of the sawn stone. Its size affects the sawing rate, the force of the saw blade and the heat dissipation of the sawing area. Its value should be selected according to the nature of the stone being sawn. Generally speaking, when cutting soft stone, such as marble, the feed speed can be appropriately increased. If the feed speed is too low, it is more conducive to increase the sawing rate. For sawing fine-grained, relatively homogeneous granite, the feed speed can be appropriately increased. If the feed speed is too low, the diamond blade will be easily polished. However, when sawing coarse-grained granite with uneven softness and hardness, the feed speed should be reduced, otherwise it will cause the saw blade to vibrate and cause the diamond to break and reduce the sawing rate. The feed speed of sawing granite is generally selected in the range of 9m to 12m/min.


Technical Parameters

Diamond wire saw

Diameter(mm)

Segment Dimension

Born/mm

No.

105

20×1.8×7.5

16、20 22.23 25.4、50

8

115

20×1.8×8.0

16、20 22.23 25.4、50

9

125

20×2.0×8.0

16、20 22.23 25.4、50

10

150

20×2.0×7.5

16、20 22.23 25.4、50

10

180

20×2.2×8.0

16、20 22.23 25.4、50

14

200

20×2.2×8.0

16、20 22.23 25.4、50

14

230

20×2.4×8.0

16、20 22.23 25.4、50

16

250

20×2.4×8.0

16、20 22.23 25.4、50

18

300

20×2.6×8.0

16、20 22.23 25.4、50

22

350

20×2.8×8.0

16、20 22.23 25.4、50

24


What is the difference between diamond saw blades and carbide saw blades?


Diamond saw blades are expensive, and cemented carbide saw blades are relatively cheap. Therefore, generally speaking, the more economical is related to your cutting volume and the hardness of the cutting material. If the cutting volume is large and the material to be cut is high in hardness, the diamond saw blade is more economical, because it eliminates the number of blade replacements and improves production efficiency. If the cutting volume is not large and the hardness of the cut material is relatively low, the carbide saw blade can fully meet the requirements. Because the cutting volume is not large, the saw blade is less worn, and there is no need to replace the saw blade frequently. In this way, the price is cheap and hard. High-quality alloy saw blades are more economical. .

 

Product display

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product displayDiamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product displayDiamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product displayDiamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product display

 

 

EXHIBITION

Customer Oriented,Honest and Highly Responsible Team  

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Exhibition 


A view on the purchase of stone: Observe the surface structure of the stone with the naked eye. Generally speaking, stone with uniform fine material structure has a fine texture, which is a good product of stone; stone with coarse grain and unequal grain structure has poor appearance effect, uneven mechanical properties, and slightly worse quality. In addition, natural stone often has some fine veins and micro-cracks due to the influence of geology. The stone is most likely to break along these parts and should be removed. As for the lack of edges and corners, it will affect the appearance, so you should pay special attention when choosing.

Second quantity: measure the size of the stone, so as not to affect the splicing, or cause the pattern, pattern, and line deformation after splicing, and affect the decorative effect.

Three listens: listen to the percussive sound of the stone. Generally speaking, a stone with good quality, dense and uniform inside and no micro-cracks will have a crisp and pleasant knocking sound; on the contrary, if there are micro-cracks or fine veins inside the stone or the contact between particles becomes loose due to weathering, the knock The hit is rough.

 

Certification

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Certification 



Related Articles

content is empty!

GET IN TOUCH