Availability: | |
---|---|
Quantity: | |
Diamond wire saw
The wire saw is used for cutting quarries, for squaring blocks or special-shaped block processing.
Three essential components for diamond wire saw are as followed:
1. Steel cable with diefferent diameter depending on the application
2. Sintered diamond beads.
3. Fixed method: springs, rubber or plastic. Protects the steel cable because of stone abrasive, and also sbsorbs the energy of the cutting friction of the beads against the stone.
Ours advantages:
1. High efficiency, safe, low-noise, less-dust, and enviroment-friendly.
2. Good cutting with small slot.
3. Few breakage raito at working thus sound lifetime.
4. Professional engineers, experienced workers, strict quality control system, top quality material etc. ensure the stable quality.
5. Other specifications are available upon request.
Products | Application | Diameter(mm) | Fixed method |
Vacuum brazed wrie saw | For marble, limestone, travertine quarry | 11.0 | spring |
For marble, limestone, travertine block squaring | 11.0 | spring | |
Diamond wire saw for granite, Sintered | For quarry | 11.5 | rubber |
For squarring | 11.0 | plastic | |
For profiling | 8.8 | plastic | |
Diamond wire saw for marble, Sintered | For quarry | 11.0 | spring |
For squarrying | 11.0 | plastic | |
For profiling | 8.8 | plastic |
Attention:
1. Regular inspections of diamond wire self rotation and adjust in time.
2. Regular inspections of diamond wire abrasion to avoid cut-in-one-side problem happened, and make the solution in time if occurs.
3. Regular inspections the joint, as well as the beads of two sides, if they are abrase badly, replaces them in time
4. The steel cable tension of the stationary machines should be controlled within 250-300kg(φ4-5mm)
5. Linear speed is ajusted according to stones hardness.
6. For the new wire, when start to cut, its linear speed should be slower 2-3m/s than the standard mentioned above, it is good for sharpen.
Technical Parameters
Diamond wire saw
Diameter(mm) | Connection | Beads/meter | Linear Speed(m/s) | Application |
8.5/8.8 11 11.5 11.5 8.5/8.8 11 | Plastic+spring Plastic Plastic Plastic+spring Plastic Spring | 37 40 40 40 37 28 | 20-30 20-30 20-30 20-30 25-35 25-35 | Granite Sandstone Granite Sandstone Granite Sandstone Granite Sandstone Marble Marble |
2.Diamond Wire Saw For Block Dressing:
We recommend plastic wire,it can be used to dissect marble granite.
It can cut accurately with small inter-space.
It can cut the block with the thickness of 2.3M
Product display
PART OF WANLONG Stone Machinery Customers(Workshop)
3.Diamond Wire Saw For Profiling :
We recommend plastic wire for shaping operations provides a huge range of possibilities
It makes smooth surface, and accurate sizes with small inter-space.
Columns and elements for the building industry can be produced in much more economic way.
EXHIBITION
Customer Oriented,Honest and Highly Responsible Team
4.Diamond Wire Saw For Reinforce Concrete Cutting:
We recommend 10.5/11.5mm Rubber and Spring wire.
The wires are widely used in the reinforced concrete with more than 5% steel inside.
Used in the building constructions, cutting for houses,bridges,cement pipes and under waster buildings.
Certification
Diamond wire saw
The wire saw is used for cutting quarries, for squaring blocks or special-shaped block processing.
Three essential components for diamond wire saw are as followed:
1. Steel cable with diefferent diameter depending on the application
2. Sintered diamond beads.
3. Fixed method: springs, rubber or plastic. Protects the steel cable because of stone abrasive, and also sbsorbs the energy of the cutting friction of the beads against the stone.
Ours advantages:
1. High efficiency, safe, low-noise, less-dust, and enviroment-friendly.
2. Good cutting with small slot.
3. Few breakage raito at working thus sound lifetime.
4. Professional engineers, experienced workers, strict quality control system, top quality material etc. ensure the stable quality.
5. Other specifications are available upon request.
Products | Application | Diameter(mm) | Fixed method |
Vacuum brazed wrie saw | For marble, limestone, travertine quarry | 11.0 | spring |
For marble, limestone, travertine block squaring | 11.0 | spring | |
Diamond wire saw for granite, Sintered | For quarry | 11.5 | rubber |
For squarring | 11.0 | plastic | |
For profiling | 8.8 | plastic | |
Diamond wire saw for marble, Sintered | For quarry | 11.0 | spring |
For squarrying | 11.0 | plastic | |
For profiling | 8.8 | plastic |
Attention:
1. Regular inspections of diamond wire self rotation and adjust in time.
2. Regular inspections of diamond wire abrasion to avoid cut-in-one-side problem happened, and make the solution in time if occurs.
3. Regular inspections the joint, as well as the beads of two sides, if they are abrase badly, replaces them in time
4. The steel cable tension of the stationary machines should be controlled within 250-300kg(φ4-5mm)
5. Linear speed is ajusted according to stones hardness.
6. For the new wire, when start to cut, its linear speed should be slower 2-3m/s than the standard mentioned above, it is good for sharpen.
Technical Parameters
Diamond wire saw
Diameter(mm) | Connection | Beads/meter | Linear Speed(m/s) | Application |
8.5/8.8 11 11.5 11.5 8.5/8.8 11 | Plastic+spring Plastic Plastic Plastic+spring Plastic Spring | 37 40 40 40 37 28 | 20-30 20-30 20-30 20-30 25-35 25-35 | Granite Sandstone Granite Sandstone Granite Sandstone Granite Sandstone Marble Marble |
2.Diamond Wire Saw For Block Dressing:
We recommend plastic wire,it can be used to dissect marble granite.
It can cut accurately with small inter-space.
It can cut the block with the thickness of 2.3M
Product display
PART OF WANLONG Stone Machinery Customers(Workshop)
3.Diamond Wire Saw For Profiling :
We recommend plastic wire for shaping operations provides a huge range of possibilities
It makes smooth surface, and accurate sizes with small inter-space.
Columns and elements for the building industry can be produced in much more economic way.
EXHIBITION
Customer Oriented,Honest and Highly Responsible Team
4.Diamond Wire Saw For Reinforce Concrete Cutting:
We recommend 10.5/11.5mm Rubber and Spring wire.
The wires are widely used in the reinforced concrete with more than 5% steel inside.
Used in the building constructions, cutting for houses,bridges,cement pipes and under waster buildings.
Certification