You are here: Home / Products / STONE MACHINERY / Thick Slab Multi Blade Marble And Granite Stone Cutting Machine

RELATED PRODUCTS

Share to:

Thick Slab Multi Blade Marble And Granite Stone Cutting Machine

Bridge Cutting Machine
Quantity:
  • QZQ-900/1200
  • WANLONG

Make cutting easier!

Heavy duty structure, High precision laser, programmable system

Bridge Marble Cutting Machine china bridge stone machinery in Stone Factory 


Technical Parameters

1. Bridge Cutting machine

Model

Unit

QZQ-900

QZQ-1200

Max. diameter of blade

mm

 

Φ600-Φ900

Φ1000-Φ1200

Main motor power

KW

18.5

18.5

Blade vertical stroke

 mm

 500

500

Table dimensions(L×W)

 mm

 3000×1600

3000×1600

Table rotating degree

 n°

 90°

90°

Max. cutting size (L×W×H)

 mm

 3000×1600×300

3000×1600×450

Overall dimensions(L×W×H)

 mm

 6000×5000×4200

6000×5000×4200

Water consumption

 m3/h

 4

4

Approximate weight

Mm

6000

6500

There are many factors influencing the cutting effect of diamond circular saw blades,there are two aspects the manufacturing and use factors. Manufacturing factors include raw materials, manufacturing processes (diamonds, binders, core blanks and formulars, hot pressing, welding, shaping), etc.; use factors refer to the choice of saw blade, the saw machinery, the selection of sawing parameters, and the installation of the saw blade. , operation, etc.






Detail Display

1、screw rod lifting system(optional)

2、computer controlled system

3、laser device

4、ACCURATE SLICING

5、steel base(optional)

 

 

PART OF WANLONG Stone Machinery Customers(Workshop)

Bridge Marble Cutting Machine china bridge stone machinery Wanlong Stone Machinery

Diamond grit 30/35-60/70 is mostly used in blade. When cutting high abrasive material the grit should be coarse, cutting very hard,high density Granite and crisp glass, the grit should be fine.


Pre-Sales Service

1. Inquiry and consulting support.

2. View our Factory.

3. Visiting Local stone factories to see our machine performance

4. Visiting Local stone factories to see our machine performance

5. After-Sales Service

Dispatching Technician to Overseas for Machine installation and Traning how to operate the machine.

6. warantee 12 months

 

Packaging Shipping

Packge depends on the quanity and the product feature

sea worthy packaging, fully wrapped with waterproof membrane and air bubbles. 1 set with one 20ft container(20GP) or LCL

 


1. the struture and size selection of saw blade:
 
The salesman is required to be familiar with the conventional structure, size, and maximum cutting depth  (which can be 1/3 of the diameter of the saw blade) of the circular saw blade of diameter ¢105-2200mm, and should be able to recommend a reasonable structure and size according to the processing conditions.
Table 1 is the circular saw blade size





EXHIBITION

Customer Oriented,Honest and Highly Responsible Team  

Bridge Marble Cutting Machine china bridge stone machinery Exhibition 


(1) The Selection of core material:
     The core must have sufficient strength, rigidity and hardness. Genarally, the hardness of core requires HRC 35-42, the maximum surface roughness is Ra 3.2um; the surface may not have cracks, burrs, or rust; the core must be eliminate distrorted forces, micro-cracks, to ensure tensile stress balance, flatness and other shape requirments and appearance, internal quality requirements.
     At present , hot-pressed, high-frequency welding core material used high quality spring steel 65Mn, 50Mn2V, laser welding saw blade core use tempered steel 30CrMo, 35CrMo, because of its low carbon content, laser welding and the transition layer solder well.


 

Certification

Bridge Marble Cutting Machine china bridge stone machinery Certification


Therefore, in addition to adjusting the diamond and the anchoring agent, it is necessary to increase cutting speed, enlarge cutting depth and decrease feeding for reducing the crush and shedding of the diamond, as well as the wear of the anchoring agent. This method can enhance cutting efficiency and prolong the lifespan. By contrast, when the diamond has excessive wear resistance, the stone will be ground into a flat or smooth arc surface, and it is hard to produce micro crushing, which means that the anchoring agent matrix is over wear-resistant or it has too much control of the diamond; the cutting depth of the saw blade is large; the feeding is small; the processed material is hard and fine;



Usually, the crush & impact resistance of good quality diamond is better, wearing out slowly and little broken when cutting, so it is very suitable used for cutting strong abrasiveness material like:sandstone, concrete pavement, bituminous pavement, refractory material. In the mean time, Diamond should easy plating,Coarse grit, low Concentration, the bond bond should be high abrasiveness with strong holding force for diamond; the lower grade diamond, cuz the rush & impact resistance is relatively worse,is suitable for cutting easy-cutting material, and the grit should be fine, concentration should be higher, bond should be softer.


Related Articles

content is empty!

GET IN TOUCH