You are here: Home / News / Suggestions to make your diamond saw blade work better

Suggestions to make your diamond saw blade work better

Views:0     Author:Site Editor     Publish Time: 2021-06-18      Origin:Site

Suggestions to make your diamond saw blade work better

The diamond saw blade is a functional part of a metal bonded diamond tool. The metal-bonded diamond tool can be a metal-bonded diamond saw blade, a diamond grinding cup wheel, a diamond core bit, a diamond helper blade, etc. The diamonds of metal-bonded diamond tools all play their role in cutting or grinding in the diamond middle section of the tool.

 

Here is the content list:

Know in advance what material you want to cut?

Choose wet cutting or dry cutting?

Know in advance what is the height of the diamond saw blade?

Precautions for using diamond saw blades.

 

Know in advance what material you want to cut?

The function of the diamond saw blade matches the material to be cut as much as possible, for example, cutting stone, granite, marble, concrete, asphalt, etc. Correctly identifying the material to be cut is the most important factor in choosing a diamond saw blade.

 

Choose wet cutting or dry cutting?

When using electric tools such as electric hand saws, it is not safe to use water due to the power source. However, diamond saw blades for concrete are usually used for wet cutting because the concrete to be cut is very hard or abrasive.

 

If the diamond saw blade is used without enough water, the diamond saw blade itself may break, or the steel core under the diamond saw blade may be worn or broken, and then the saw blade will fly out and may injure the operator or nearby Staff. If you must perform dry cutting for some reason, you should choose a sharper diamond saw blade, and dry cutting should be intermittent and shallow to keep the diamond saw blade cool.

 

Know in advance what is the height of the diamond saw blade?

Due to the non-diamond bearing segment base required for the laser welding or brazing process, the total height of the segment can be misleading. Many other factors will affect the performance and corresponding value of the blade. Consider the size, concentration and quality of the diamond saw blade, the hardness of the bond, the cutting capacity (torque) of the diamond saw blade and the matching degree of the saw blade specifications with the material being cut.

 

How to give full play to the best performance of diamond saw blades?

Is the best performance of diamond saw blades the initial cost of diamond saw blade or the total cost savings? For larger projects or regular use, the higher-priced diamond saw blade will actually be cheaper to use because it will bring the lowest single cutting cost. For small cutting jobs, you can buy economical saw blades or cheap diamond saw blade.

 

Precautions for using diamond saw blades.

The characteristics of the diamond saw blade on the diamond tool should match the nature of the material to be cut. If the material is hard, the bond of the diamond saw blade should be softer. Because when cutting hard materials, diamond saw blades tend to become dull. The duller diamond saw blade can be worn out by the dull diamond more quickly, and then the new diamond underneath is more easily exposed to participate in the cutting. If the material is relatively soft, the bond should be harder. Because in this case, the diamond saw blade can last longer. The harder bonding layer wears more slowly, so it can also hold the diamond for a longer period of time. This can make better use of diamonds and extend the service life of diamond tools.

 

The particle size (size), hardness, and concentration of the diamond in the diamond saw blade should also be considered. For example, when the material to be cut is soft, the size of the diamond saw blade may be large, the hardness may be medium, and the concentration will be higher. This combination can obtain good cutting efficiency and prolong the service life of the blade. When the material is hard, the size of the diamond saw blade should be smaller, the hardness should be higher, and the concentration can be lower. 


GET IN TOUCH