You are here: Home / Products / DIAMOND TOOLS / DIAMOND SAW BLADE / Segmented Diamond Saw Blade High Speed Diamond Saw Blade
Share to:

Segmented Diamond Saw Blade High Speed Diamond Saw Blade

Dry cutting blade
Quantity:
  • WANLONG

CONSTRUCTION SAW BLADE 

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade CONSTRUCTION SAW BLADE

Are there any saw blades for cutting tempered glass?

It can be cut with a sintered saw blade for cutting ceramic pieces. If the cutting quality is not high, you can use electroplated diamond saw blades for cutting, or brazed diamond saw blades, pay attention to choosing fine-grained diamond as much as possible.

 


Technical Parameters

Diamond wire saw

Diameter(mm)

Segment Dimension

Born/mm

No.

105

20×1.8×7.5

16、20 22.23 25.4、50

8

115

20×1.8×8.0

16、20 22.23 25.4、50

9

125

20×2.0×8.0

16、20 22.23 25.4、50

10

150

20×2.0×7.5

16、20 22.23 25.4、50

10

180

20×2.2×8.0

16、20 22.23 25.4、50

14

200

20×2.2×8.0

16、20 22.23 25.4、50

14

230

20×2.4×8.0

16、20 22.23 25.4、50

16

250

20×2.4×8.0

16、20 22.23 25.4、50

18

300

20×2.6×8.0

16、20 22.23 25.4、50

22

350

20×2.8×8.0

16、20 22.23 25.4、50

24


How to choose the diamond concentration of the saw blade?

When the diamond concentration in the middle layer is too large, the width of the middle edge formed by the tool tip is very large, and the width and depth of the two grooves are very small. This is because the diamond concentration in the middle layer is too large, and the working surface of the middle layer The more exposed effective diamond abrasive grains, the more difficult it is for the diamond to micro-crack and edge out. The matrix wear of the middle layer is slower than that of the edge layer. The width of the middle edge formed by the tool tip wear is too large, and the width and depth of the two grooves Small, the blade tends to be rounded, so the sharpness of the saw blade is poor, and the service life is not long. It can be seen that there is an optimal diamond concentration difference between the material layer and the edge material layer in the orderly arranged saw blade, which makes the cutter head form a three-blade symmetrical sector structure with reasonable groove depth and width after wear. The simultaneous wear of the material layer and the edge material layer, so that the orderly arranged saw blade has the best comprehensive processing performance.

 

Product display

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product displayDiamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product displayDiamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product displayDiamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product display

 

 




EXHIBITION

Customer Oriented,Honest and Highly Responsible Team  

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Exhibition 




Certification

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Certification 



Related Articles

content is empty!

GET IN TOUCH