You are here: Home / Products / STONE MACHINERY / Manual Polish Hand Operated Marble Granite Slab Marble Machine Stone Polishing Machine

RELATED PRODUCTS

Share to:

Manual Polish Hand Operated Marble Granite Slab Marble Machine Stone Polishing Machine

Polishing Machine
Quantity:
  • MS-2600
  • WANLONG

Make cutting easier!

Easy operation, flexible application, superb polishing

Manual Stone Polishing Machine for Quartz in Stone Factory

 

Technical Parameters

Polishing Machine

Model

Unit

MS-2600

MS-3000

Main motor power

KW

 

4.5/5.5

4.5/5.5

Gyro radius

mm

2600

3000

Range of vertical stroke

mm

0-800

0-800

Grinding wheel diameter

mm

220

220

Max.polishing size

mm

2600x900

3000x1200

Overall dimensions(L×W×H)

mm

3500×650×1700

3800×650×1700

Water consumption

m3/h

3

3

Approximate weight

kg

850

900

Stone Polishing Grinding Manual Operation Granite Marble Machine, uses round column as its guide slip surface for steady automatic ups and downs.

The main drive has two kinds: single speed and double speeds. The machine is appliable to plane grinding and polishing of slabs with greatly varying thickness,

tombstones, and stone with design. The worktable can be selected for grinding crafts camber inside and outside.


Detail Display

Arc table(optional)

Pneumatic lifting  system(optional)

 

 

PART OF WANLONG Stone Machinery Customers(Workshop)

Manual Stone Polishing Machine for Quartz OF WANLONG Stone Machinery


Core structure selection:
 
From the structure, as usual the core can be divided into continuous type and a water outlet type.
The continuous core is mainly used for the production of hot-pressed saw blades, its edges are mostly of thin walled teeth, the water-outlet type core can be used for welding or hot pressing.
The core of Narrow water slot (small U, Key slot) is for cutting weakly abrasive or brittle materials (such as limestone, marble, microlite  stone, glazed tiles or granite) medium diameter saw blade, wide water slot core (large U-slot) is used for large size blade or medium-size that cut strong abraive materials (such as sandstone, concrete, asphalt pavement, wall, refractories, etc),which facilitates large amounts of coolant flowing into the cuts for chipping and cooling.


Overall, granite cutting blades are largely used on the small U-shape and keyhole steel; marble cutting blades on the very narrow U-shape steel; reinforced concrete blades on the keyhole steel; green concrete blades and asphalt blades on the large U-shape steel with protected teeth.

 

Packaging Shipping

Packge depends on the quanity and the product feature

sea worthy packaging, fully wrapped with waterproof membrane and air bubbles. 1 set with one 20ft container(20GP) or LCL

 

EXHIBITION

Customer Oriented,Honest and Highly Responsible Team  

Manual Stone Polishing Machine for Quartz Exhibition

 

On the narrow nozzle steel , segment can be close to each other, which will improve the continuity of sawing, mitigate the impact, and reduce chipping, thus extending the lifespan of saw blade. Nevertheless, the stress at the bottom of the nozzle is more concentrated in this case, formulating cracks. As a result, the stone may be uneven, especially for dry cutting.


Certification

Manual Stone Polishing Machine for Quartz Certification

It is worthy of mark that the opening of the steel can prolong its outer edge to some extent, and increase the stress. This design can compensate for edge extension caused by thermal or centrifugal force during welding and use, which redounds to non-deforming  production (integral hot pressing, welding compensation thermal stress, or shrinkage stress of the steel), chip removal and cooling in usage, as well as the reduction of swing and ‘S’ cutting path. However, the steel with an opening is vulnerable to cracks and abrasive wear during use, which is mainly attributed to the fact that the force is repeatedly concentrated on the bottom of the nozzle in cutting (stretching and compressing), resulting in fatigue cracks. 


Generally, enlarging the radius of the arc at the bottom of the nozzle is conducive to dispersing the stress. Thus, once a crack is found, it is feasible to drill a round hole at the root of the crack, preventing the further spread of the crack. In addition, the saw blade with protected teeth can be used to reduce the wear of the girdle on the opening of the nozzle matrix in cutting strong abrasive stone


Related Articles

content is empty!

GET IN TOUCH