You are here: Home / Products / STONE MACHINERY / Manual Flexible Arm Stone Polisher Marble Granite Quartz Polishing Machine


Share to:

Manual Flexible Arm Stone Polisher Marble Granite Quartz Polishing Machine

Polishing Machine
  • MS-2600

Make cutting easier!

Easy operation, flexible application, superb polishing

Manual Stone Polishing Machine for Quartz in Stone Factory


Technical Parameters

Polishing Machine





Main motor power





Gyro radius




Range of vertical stroke




Grinding wheel diameter




Max.polishing size




Overall dimensions(L×W×H)




Water consumption




Approximate weight




The machine applies to grind and polish marble, granite, artificial panel, and sidestep stone, which is flexible in operation, stable in property, and convenient in maintenance.

Usually, the crush & impact resistance of good quality diamond is better, wearing out slowly and little broken when cutting, so it is very suitable used for cutting strong abrasiveness material like:sandstone, concrete pavement, bituminous pavement, refractory material. In the mean time, Diamond should easy plating,Coarse grit, low Concentration, the bond bond should be high abrasiveness with strong holding force for diamond; the lower grade diamond, cuz the rush & impact resistance is relatively worse,is suitable for cutting easy-cutting material, and the grit should be fine, concentration should be higher, bond should be softer.


PART OF WANLONG Stone Machinery Customers(Workshop)

Manual Stone Polishing Machine for Quartz OF WANLONG Stone Machinery

The silent steel can lower the noise produced by saw blades in cutting. Such steel is mostly composed of composite materials: adding a layer of materials (copper foil, rubber, elastic polymer) with the high sound absorption coefficient into the middle of the steel ; filling the spoon-shape nozzle in the steel with a better sound-absorbing copper sheet; regularly cutting some ‘S’- and ‘C’-shape seams with laser along the bottom and center hole of the nozzle at the radial direction, and then pouring special resin materials into these seams.


Customer Oriented,Honest and Highly Responsible Team  

Manual Stone Polishing Machine for Quartz Exhibition


As a kind of rough working, diamond saw blade cutting has a high requirement for efficiency and lifespan. The diamond should have reasonable wear and fragment shedding, while giving full play to its role. Both the premature consumption and excessive wear resistance of diamond are adverse to the cutting process. The former means that the diamond fails to function properly, which may be caused by a variety of factors: the steel is not wear-resistant or is weak to control the diamond; the cutting spend or the feeding speed is too high; the abrasive property of the stone is too strong; or the diamond has poor quality and low concentration if large fragments are found. The premature consumption of diamond is usually featured by low cutting efficiency and short lifespan.

 Therefore, in addition to adjusting the diamond and the anchoring agent, it is necessary to increase cutting speed, enlarge cutting depth and decrease feeding for reducing the crush and shedding of the diamond, as well as the wear of the anchoring agent. This method can enhance cutting efficiency and prolong the lifespan. By contrast, when the diamond has excessive wear resistance, the stone will be ground into a flat or smooth arc surface, and it is hard to produce micro crushing, which means that the anchoring agent matrix is over wear-resistant or it has too much control of the diamond; the cutting depth of the saw blade is large; the feeding is small; the processed material is hard and fine; the diamond has good quality and high concentration; the cutting depth of diamond particles into the rock is small; diamond particles are subjected to low impact and cutting force. In this case, the saw blade will have low cutting efficiency and long life macroscopically. Therefore, both the diamond and the anchoring agent should be modified. Meanwhile, it is essential to slow cutting speed, narrow cutting depth, and increase feeding, which can motivate the diamond to produce micro fractures and accelerate matrix wear, thus improve cutting efficiency.


Manual Stone Polishing Machine for Quartz Certification


Q1: -How to order?

           -1. Please tell us what model and quantity you need.

          2. We will make a PI for you to confirm the order details.

          3. When we confirm everything, we can arrange the payment.

          4. Finally we deliver the goods within the stipulated time.


Q2: -When will make delivery?

          -Small machine: 7 days after payment

        -Big machine: 15~20 days after payment


Q3: -After-sales service

           -One year for all machines. If you find any defective accessories, we will be free to replace the new parts           for you.


Q4: -Payment



Q5: -Transportation

           -Transportation by logistics, ocean transportation.


Q6: -Are you a trader or manufacturer:

         -We are manufacturer.


Q7: -Can I become a distributor of OMC?

         -Yes, of course you can. 

Related Articles

content is empty!