Availability: | |
---|---|
Quantity: | |
WANLONG
CONSTRUCTION SAW BLADE
How to do the dynamic balance of diamond saw blade?
How does the special dynamic balance machine for saw blades correct the dynamic balance? There are many factors that cause unbalance when the saw blade rotates at high speed. The centrifugal force causes the vibration of the processing system. Excessive centrifugal force aggravates the abnormal wear of the saw blade and reduces the processing accuracy and surface quality of the workpiece, so it is very necessary to do Dynamic balance.
The advantages of the single-sided vertical balancing machine for saw blades of Shenman Dynamic Balancing Machine Factory:
1. Equipped with an advanced measurement system, adopting the principle of permanent calibration measurement.
2. The system has its own self-check function to accurately perform fault self-check
3. With indexing function, quickly find out the position of imbalance
4. The user can choose the weighting and de-weighting method according to the needs
5. Computer LCD display, touch operation, more simple and convenient
6. Display speed, support mode and the magnitude and phase of the correction surface
7. High sensitivity sensor with good linearity.
Technical Parameters
Diamond wire saw
Diameter(mm) | Segment Dimension | Born/mm | No. |
105 | 20×1.8×7.5 | 16、20 22.23 25.4、50 | 8 |
115 | 20×1.8×8.0 | 16、20 22.23 25.4、50 | 9 |
125 | 20×2.0×8.0 | 16、20 22.23 25.4、50 | 10 |
150 | 20×2.0×7.5 | 16、20 22.23 25.4、50 | 10 |
180 | 20×2.2×8.0 | 16、20 22.23 25.4、50 | 14 |
200 | 20×2.2×8.0 | 16、20 22.23 25.4、50 | 14 |
230 | 20×2.4×8.0 | 16、20 22.23 25.4、50 | 16 |
250 | 20×2.4×8.0 | 16、20 22.23 25.4、50 | 18 |
300 | 20×2.6×8.0 | 16、20 22.23 25.4、50 | 22 |
350 | 20×2.8×8.0 | 16、20 22.23 25.4、50 | 24 |
How to distinguish the quality of diamond saw blades from the appearance?
Diamond saw blades are not like ordinary commodities, and it is easy to see whether they are good or bad in appearance. Saw blades are similar in appearance to tools. If you are not a professional, it is difficult to see the advantages and disadvantages with the naked eye. To identify the quality of the diamond saw blade, firstly see whether the cutter head is in the same straight line, and then observe the weld, weight, and hardness. Through these four aspects, the quality of the diamond saw blade can be roughly distinguished. It is recommended to go to Xingyi Mechanical Energy for detailed answers.
Product display
EXHIBITION
Customer Oriented,Honest and Highly Responsible Team
What is the difference between dry diamond saw blade and wet diamond saw blade?
Dry diamond circular saw blades are different from wet cutting saw blades in that they do not use cutting fluid for cutting, so they need to be able to supplement cooling and increase cutting force. Therefore, dry cutting is mostly designed to be large due to heat dissipation. Serrated and wet cutting are mostly circular saws or small serrations. Because circular saw blades are widely used on various cutting machines such as flat grinders for sawing cemented carbide, graphite, standing hand pressure cutting machines (Stationary Cutter) sawing semi-precious stones (crystal, agate), asphalt, stone, special cutting machine saw (Proffesional Machine) sawing glass, quartz, etc., so each has different characteristics and uses. In general, the reason for choosing dry Most cutting is to observe the cutting surface. Reduce cutting noise. Cooperate with cutting machine design and other factors.
Certification
CONSTRUCTION SAW BLADE
How to do the dynamic balance of diamond saw blade?
How does the special dynamic balance machine for saw blades correct the dynamic balance? There are many factors that cause unbalance when the saw blade rotates at high speed. The centrifugal force causes the vibration of the processing system. Excessive centrifugal force aggravates the abnormal wear of the saw blade and reduces the processing accuracy and surface quality of the workpiece, so it is very necessary to do Dynamic balance.
The advantages of the single-sided vertical balancing machine for saw blades of Shenman Dynamic Balancing Machine Factory:
1. Equipped with an advanced measurement system, adopting the principle of permanent calibration measurement.
2. The system has its own self-check function to accurately perform fault self-check
3. With indexing function, quickly find out the position of imbalance
4. The user can choose the weighting and de-weighting method according to the needs
5. Computer LCD display, touch operation, more simple and convenient
6. Display speed, support mode and the magnitude and phase of the correction surface
7. High sensitivity sensor with good linearity.
Technical Parameters
Diamond wire saw
Diameter(mm) | Segment Dimension | Born/mm | No. |
105 | 20×1.8×7.5 | 16、20 22.23 25.4、50 | 8 |
115 | 20×1.8×8.0 | 16、20 22.23 25.4、50 | 9 |
125 | 20×2.0×8.0 | 16、20 22.23 25.4、50 | 10 |
150 | 20×2.0×7.5 | 16、20 22.23 25.4、50 | 10 |
180 | 20×2.2×8.0 | 16、20 22.23 25.4、50 | 14 |
200 | 20×2.2×8.0 | 16、20 22.23 25.4、50 | 14 |
230 | 20×2.4×8.0 | 16、20 22.23 25.4、50 | 16 |
250 | 20×2.4×8.0 | 16、20 22.23 25.4、50 | 18 |
300 | 20×2.6×8.0 | 16、20 22.23 25.4、50 | 22 |
350 | 20×2.8×8.0 | 16、20 22.23 25.4、50 | 24 |
How to distinguish the quality of diamond saw blades from the appearance?
Diamond saw blades are not like ordinary commodities, and it is easy to see whether they are good or bad in appearance. Saw blades are similar in appearance to tools. If you are not a professional, it is difficult to see the advantages and disadvantages with the naked eye. To identify the quality of the diamond saw blade, firstly see whether the cutter head is in the same straight line, and then observe the weld, weight, and hardness. Through these four aspects, the quality of the diamond saw blade can be roughly distinguished. It is recommended to go to Xingyi Mechanical Energy for detailed answers.
Product display
EXHIBITION
Customer Oriented,Honest and Highly Responsible Team
What is the difference between dry diamond saw blade and wet diamond saw blade?
Dry diamond circular saw blades are different from wet cutting saw blades in that they do not use cutting fluid for cutting, so they need to be able to supplement cooling and increase cutting force. Therefore, dry cutting is mostly designed to be large due to heat dissipation. Serrated and wet cutting are mostly circular saws or small serrations. Because circular saw blades are widely used on various cutting machines such as flat grinders for sawing cemented carbide, graphite, standing hand pressure cutting machines (Stationary Cutter) sawing semi-precious stones (crystal, agate), asphalt, stone, special cutting machine saw (Proffesional Machine) sawing glass, quartz, etc., so each has different characteristics and uses. In general, the reason for choosing dry Most cutting is to observe the cutting surface. Reduce cutting noise. Cooperate with cutting machine design and other factors.
Certification