Availability: | |
---|---|
Quantity: | |
WANLONG
CONSTRUCTION SAW BLADE
What should I pay attention to when using diamond saw blades and tools?
First of all, it is necessary to see whether the rotation direction of the saw blade is consistent with the direction on the saw blade description, because when the saw blade is sharpened, the saw blade has its own physical characteristics. If the direction is reversed, it will definitely affect the use time of the saw blade. It further affects the level of the saw blade, and the later cutting will be uneven.
Technical Parameters
Diamond wire saw
Diameter(mm) | Segment Dimension | Born/mm | No. |
105 | 20×1.8×7.5 | 16、20 22.23 25.4、50 | 8 |
115 | 20×1.8×8.0 | 16、20 22.23 25.4、50 | 9 |
125 | 20×2.0×8.0 | 16、20 22.23 25.4、50 | 10 |
150 | 20×2.0×7.5 | 16、20 22.23 25.4、50 | 10 |
180 | 20×2.2×8.0 | 16、20 22.23 25.4、50 | 14 |
200 | 20×2.2×8.0 | 16、20 22.23 25.4、50 | 14 |
230 | 20×2.4×8.0 | 16、20 22.23 25.4、50 | 16 |
250 | 20×2.4×8.0 | 16、20 22.23 25.4、50 | 18 |
300 | 20×2.6×8.0 | 16、20 22.23 25.4、50 | 22 |
350 | 20×2.8×8.0 | 16、20 22.23 25.4、50 | 24 |
When installing the diamond saw blade, keep the shaft, chuck and flange clean. The inner diameter of the flange is the same as the inner diameter of the diamond saw blade to ensure that the flange and the diamond saw blade are tightly combined. Install fine and accurate positioning pins and tighten them. Nut. The size of the flange should be appropriate, and the outer diameter should not be less than 1/3 of the diameter of the diamond cutting disc.
Product display
Idling before use, check whether it is normal, whether there is slippage, swing, etc. Now, the quality of the current saw blades are good, and this situation will basically not happen, but safety is no small matter. Don't have a fluke.
If an abnormal sound occurs during use, you should stop working immediately to troubleshoot the problem and avoid safety incidents. When dry cutting, please do not cut continuously for a long time, so as not to affect the service life of the diamond saw blade and the good cutting effect; wet cutting should be cut with water to prevent leakage.
EXHIBITION
Customer Oriented,Honest and Highly Responsible Team
Certification
CONSTRUCTION SAW BLADE
What should I pay attention to when using diamond saw blades and tools?
First of all, it is necessary to see whether the rotation direction of the saw blade is consistent with the direction on the saw blade description, because when the saw blade is sharpened, the saw blade has its own physical characteristics. If the direction is reversed, it will definitely affect the use time of the saw blade. It further affects the level of the saw blade, and the later cutting will be uneven.
Technical Parameters
Diamond wire saw
Diameter(mm) | Segment Dimension | Born/mm | No. |
105 | 20×1.8×7.5 | 16、20 22.23 25.4、50 | 8 |
115 | 20×1.8×8.0 | 16、20 22.23 25.4、50 | 9 |
125 | 20×2.0×8.0 | 16、20 22.23 25.4、50 | 10 |
150 | 20×2.0×7.5 | 16、20 22.23 25.4、50 | 10 |
180 | 20×2.2×8.0 | 16、20 22.23 25.4、50 | 14 |
200 | 20×2.2×8.0 | 16、20 22.23 25.4、50 | 14 |
230 | 20×2.4×8.0 | 16、20 22.23 25.4、50 | 16 |
250 | 20×2.4×8.0 | 16、20 22.23 25.4、50 | 18 |
300 | 20×2.6×8.0 | 16、20 22.23 25.4、50 | 22 |
350 | 20×2.8×8.0 | 16、20 22.23 25.4、50 | 24 |
When installing the diamond saw blade, keep the shaft, chuck and flange clean. The inner diameter of the flange is the same as the inner diameter of the diamond saw blade to ensure that the flange and the diamond saw blade are tightly combined. Install fine and accurate positioning pins and tighten them. Nut. The size of the flange should be appropriate, and the outer diameter should not be less than 1/3 of the diameter of the diamond cutting disc.
Product display
Idling before use, check whether it is normal, whether there is slippage, swing, etc. Now, the quality of the current saw blades are good, and this situation will basically not happen, but safety is no small matter. Don't have a fluke.
If an abnormal sound occurs during use, you should stop working immediately to troubleshoot the problem and avoid safety incidents. When dry cutting, please do not cut continuously for a long time, so as not to affect the service life of the diamond saw blade and the good cutting effect; wet cutting should be cut with water to prevent leakage.
EXHIBITION
Customer Oriented,Honest and Highly Responsible Team
Certification