You are here: Home / Products / DIAMOND TOOLS / DIAMOND SAW BLADE / General Purpose Segment Type Diamond Saw Blade for Granite Stone Concrete Cutting
Share to:

General Purpose Segment Type Diamond Saw Blade for Granite Stone Concrete Cutting

Dry cutting blade
Quantity:
  • WANLONG

CONSTRUCTION SAW BLADE 

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade CONSTRUCTION SAW BLADE


3:The application of Medium-diameter diamond blade
Diamond medium-diameter saw blades are mainly used for horizontal cutting of stone slabs, trimming, cutting and grooving of granite, marble, sandstone, artificial stone, microcrystalline stone, quartz stone, wall and floor tiles, ceramics, etc. Cutting high-density refractory materials, high-voltage electric porcelain bottles, asphalt pavements, concrete pavement expansion joints, aircraft runway anti-skid troughs, wall materials, cement floors, electrical insulation materials, etc., which diameter above Φ400mm is mainly used for similar tombstones and tombstones. Forming sawing of thicker slabs (columns).






Technical Parameters

Diamond wire saw

Diameter(mm)

Segment Dimension

Born/mm

No.

105

20×1.8×7.5

16、20 22.23 25.4、50

8

115

20×1.8×8.0

16、20 22.23 25.4、50

9

125

20×2.0×8.0

16、20 22.23 25.4、50

10

150

20×2.0×7.5

16、20 22.23 25.4、50

10

180

20×2.2×8.0

16、20 22.23 25.4、50

14

200

20×2.2×8.0

16、20 22.23 25.4、50

14

230

20×2.4×8.0

16、20 22.23 25.4、50

16

250

20×2.4×8.0

16、20 22.23 25.4、50

18

300

20×2.6×8.0

16、20 22.23 25.4、50

22

350

20×2.8×8.0

16、20 22.23 25.4、50

24




Product display

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product displayDiamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product displayDiamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product displayDiamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product display

 

 

The requirements for edge of slab are highest (sharpness, good quality of edge).

Medium-diameter diamond blades
 are mostly used on small bridge cutters (hydraulic or manual), and move cutting (such as road expansion joint cutting) multi-handed cutting machine.



 

why low production:

1)segment not sharp at all and steel core of the blade is poor.

2)the linear speed is not suitable for the blade.

3)the main motor power capacity is too small.                        

4)the belt for main drive is slip.

5)the saddle gap of machine is too big;                         

6)the gear box bearing is not suitable.

7)the gear box do not work inquired circle.                      

8 blade is not fixed firmly.

9)the inner circle for the gear of gear box has big gap.                  

10)the main shaft is bent and loose its shape.

(11the liner speed, cutting depth is not suitable for machine speed.   

12)the haulage rope for the machine is slip.

13)the cooling water is insufficient.                           

14)the machine do not stable.





EXHIBITION

Customer Oriented,Honest and Highly Responsible Team  

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Exhibition 


The diamond segments can be made into ARIX or non-ARIX.The diamond segment with high-frequency welding can be diamond layer free(which can enhance the weldability and make full use of diamond layer),diamond segment with laser welding should have a primer.


Certification

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Certification 


 

The main purpose of stone processing is high-frequency Medium-diameter diamond saw blade.

There is another method that make the diamond segment and steel blank cold press,and then sintered together.This diamond blade is less rigid than the welded saw blade and is used for less demanding cuts.


Related Articles

content is empty!

GET IN TOUCH