You are here: Home / Products / STONE MACHINERY / Diamond Wire Saw CNC Cutting Machine for Stone Marble Granite Block Cut

RELATED PRODUCTS

Share to:

Diamond Wire Saw CNC Cutting Machine for Stone Marble Granite Block Cut

Numerical Control Wire Saw
Quantity:
  • SJ-2000A
  • WANLONG

Make cutting easier!

Numerical Control Wire Saw Stone Machinery for Marble


Technical Parameters

1. SJ-2000A

Numerical Control Wire Saw

Model

Unit

SJ-2000A

Diameter of diamond wire

mm

Φ8.6-Φ10.8

Wire length

mm

14800

Main motor power

KW

7.5

Table dimensions(L×W)

mm

2000×1300

Max.cutting size(L×W×H)

mm

2000×2000×1500

Overall dimensions(L×W×H)

mm

6810×5354×3770

Water consumption

m³/h

6

Approximate weighe

kg

7500



CNC Panel

 Numerical Control Wire Saw Stone Machinery for Marble CNC Panel


PART OF WANLONG Stone Machinery Customers(Workshop)

Numerical Control Wire Saw Stone Machinery for Marble OF WANLONG Stone Machinery 


1. It has heavy load bearing structure, four orbits on each upright column, adjusted the balance by the rollers, with less friction and higher precision. 
2. The left and right frame achieve synchronized lifting by steering equipment on the upper frame. The lifting accuracy increased by the conbine of lead screw and double nuts. 
3. Cantilever part, firstly the lead screw and pole adjust the distance of guide wheel, guide wheel is controlled by CNC. Secondly in order to make the diamond wire rope cutting direction coincidence, reducer control the guide wheel rotating angle. 
4. Worktable is running by lead screw and railway. 
5. There has automatic alarm if wire broken. 



Detail Display

1、Scene processing

2、Computer controlled system

Numerical Control Wire Saw Stone Machinery for Marble Detail Display


There is One thing should be pay special attention: for high temperature & wear-resisting bond, high grade diamond and hard cutting material, if you mix some low grade diamond, would decrease obviously the cutting efficiency and life.



 

EXHIBITION

Customer Oriented,Honest and Highly Responsible Team  

 机械描述下(新20_04


Diamond grit 30/35-60/70 is mostly used in blade. When cutting high abrasive material the grit should be coarse, cutting very hard,high density Granite and crisp glass, the grit should be fine.


Increasing concentration of diamond can longer the blade life by reducing cutting force of each diamond which reduce the wearance.But on the other hand,it reduce also the cutting efficiency and increase the cost. Theoretically, there would exist a most economic concentration.

According to different cutting requirements, the concentration of blade would range 10/50%. Small blade mostly range between 10-20%, medium diameter blade 15-40%, big size blade 25-50%.

Tips: diamond concentration means how many diamond included in segment layers,

Stipulating: diamond volume takes up 25% of diamond layer (equal to including 4.4ct/cm3 diamond), the concentration is 100%,And so on.




 


Certification

Numerical Control Wire Saw Stone Machinery for Marble Exhibition


Related Articles

content is empty!

GET IN TOUCH