You are here: Home / Products / DIAMOND TOOLS / DIAMOND SAW BLADE / Diamond Saw Blade Circular Diamond Saw Blade for Concrete
Share to:

Diamond Saw Blade Circular Diamond Saw Blade for Concrete

Dry cutting blade
Quantity:
  • WANLONG

CONSTRUCTION SAW BLADE 

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade CONSTRUCTION SAW BLADE

Cutting parameters of diamond saw blades


The feed speed bai is the feed speed of the sawn stone. Its size affects the sawing rate, the force of the saw blade and the heat dissipation of the sawing area. Its value should be selected according to the nature of the stone being sawn. Generally speaking, when cutting soft stone, such as marble, the feed speed can be appropriately increased. If the feed speed is too low, it is more conducive to increase the sawing rate. For sawing fine-grained, relatively homogeneous granite, the feed speed can be appropriately increased. If the feed speed is too low, the diamond blade will be easily polished. However, when sawing coarse-grained granite with uneven softness and hardness, the feed speed should be reduced, otherwise it will cause the saw blade to vibrate and cause the diamond to break and reduce the sawing rate. The feed speed of sawing granite is generally selected in the range of 9m to 12m/min.


Technical Parameters

Diamond wire saw

Diameter(mm)

Segment Dimension

Born/mm

No.

105

20×1.8×7.5

16、20 22.23 25.4、50

8

115

20×1.8×8.0

16、20 22.23 25.4、50

9

125

20×2.0×8.0

16、20 22.23 25.4、50

10

150

20×2.0×7.5

16、20 22.23 25.4、50

10

180

20×2.2×8.0

16、20 22.23 25.4、50

14

200

20×2.2×8.0

16、20 22.23 25.4、50

14

230

20×2.4×8.0

16、20 22.23 25.4、50

16

250

20×2.4×8.0

16、20 22.23 25.4、50

18

300

20×2.6×8.0

16、20 22.23 25.4、50

22

350

20×2.8×8.0

16、20 22.23 25.4、50

24


Why do diamond saw blades need to be edged and under what circumstances

The process of cutting materials with diamond saw blades is the process of continuous exposure and continuous shedding of diamonds. In the sawing process, whether diamond can play a good role, the key is the ability of metal powder to hold diamond.

In many cases, the reason why the saw blade cannot cut is that the front diamond has fallen off, and the back diamond has not been exposed or only a little exposed. The metal powder has a good holding force on the diamond. At this time, the diamond saw blade needs to be adjusted first. Make an edge.

The most commonly used and easiest way to sharpen a diamond saw blade is to cut red bricks or refractory bricks for a short period of time, so that the diamonds are exposed in time. So on the side, the sparse density can be used to sharpen the saw blade. Of course, cutting is not a problem. For cutting this kind of low density, as long as it is durable.

 

Product display

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product displayDiamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product displayDiamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product displayDiamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product display

 

 

EXHIBITION

Customer Oriented,Honest and Highly Responsible Team  

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Exhibition 


What is the difference between dry diamond saw blade and wet diamond saw blade?


Dry diamond circular saw blades are different from wet cutting saw blades in that they do not use cutting fluid for cutting, so they need to be able to supplement cooling and increase cutting force. Therefore, dry cutting is mostly designed to be large due to heat dissipation. Serrated and wet cutting are mostly circular saws or small serrations. Because circular saw blades are widely used on various cutting machines such as flat grinders for sawing cemented carbide, graphite, standing hand pressure cutting machines (Stationary Cutter) sawing semi-precious stones (crystal, agate), asphalt, stone, special cutting machine saw (Proffesional Machine) sawing glass, quartz, etc., so each has different characteristics and uses. In general, the reason for choosing dry Most cutting is to observe the cutting surface. Reduce cutting noise. Cooperate with cutting machine design and other factors.

 

Certification

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Certification 



Related Articles

content is empty!

GET IN TOUCH