Views:0 Author:Site Editor Publish Time: 2021-06-30 Origin:Site
With the rapid development of my country's stone cutting machine industry in recent years, related ancillary industries have also developed, including stone mining, processing, stone cutting machine maintenance and other industries, which have unlimited market potential in my country. Among them, the stone processing industry should be regarded as the most concerned. In the processing of stone, the stone cutting machine is definitely indispensable. The types of cutting machines used mainly include water jet cutting machines, infrared cutting machines, etc. Have a certain insight and understanding of the operating procedures and maintenance of the stone cutting machine before operation.
Here is the content list:
l Daily maintenance and maintenance of stone cutting machine
l Weekly maintenance and maintenance of stone cutting machine
l Monthly and quarterly maintenance of stone cutting machine
l In the event of personal or stone cutting machine accidents, keep the scene and report to relevant departments.
Daily maintenance and maintenance of stone cutting machine
l Every working day must clean up the dirt of the stone cutting machine and guide rails to keep the bed clean, turn off the air source and power supply when off work, and drain the remaining air in the machine tool pipe belt.
l If you leave the stone cutting machine for a long time, turn off the power to prevent non-professionals from operating it.
l Pay attention to observe whether there is lubricating oil on the surface of the horizontal and vertical guide rails and rack of the stone cutting machine to keep them well lubricated!
Weekly maintenance and maintenance of stone cutting machine
l The stone cutting machine must be cleaned up every week, the horizontal and vertical guide rails, transmission gear racks, and lubricating oil must be added.
l Check whether the horizontal and vertical rail wipers of the stone cutting machine are working properly, and replace them in time if they are abnormal.
l Check whether all the cutting torches of the stone cutting machine are loose, clean up the rubbish of the ignition muzzle, and keep the ignition normal.
l If there is an automatic height adjustment device, check whether it is sensitive and whether to replace the probe.
l Check whether the cutting nozzle and electrode of the plasma stone cutting machine are damaged, and whether the cutting nozzle and electrode need to be replaced.
Monthly and quarterly maintenance of stone cutting machine
l Check whether there is rubbish at the main air inlet of the stone cutting machine, and whether each valve and pressure gauge are working properly.
l Check whether all gas pipe joints of the stone cutting machine are loose and all pipes are not damaged. Tighten or replace if necessary.
l Check all transmission parts for looseness, check the meshing of gears and racks, and make adjustments if necessary.
l Loosen the tightening device and push the pulley with your hand. Check whether the stone cutting machine can come and go freely. If there is any abnormality in the stone cutting machine, adjust or replace it in time.
l Check the clamping block, steel belt and guide wheel for looseness and tightness of the steel belt, and adjust if necessary.
l Check the performance of all the buttons and selector switches of the stone cutting machine, replace them if they are damaged, and finally draw a comprehensive inspection graph to check the accuracy of the machine.
In the event of personal or stone cutting machine accidents, keep the scene and report to relevant departments.
The position of stone cutting machine in stone processing is irreplaceable, but the problem of this type of cutting machine in use is also very common. The most common is to accidentally cut the stone into small or large, and the cut is wrong. And so on, such mistakes increase the production cost of the company's stone cutting machine.
The stone cutting machine also needs to be properly maintained in the process of use, so as to avoid damage to the cutting machine due to improper operation or negligence in maintenance. If it is damaged before it becomes nervous, then it will be expensive.
After nearly 20 years of hard work, Fujian Wanlong has become a high-tech group integrating R&D, production, export sales and service. The diamond stone cutting machine, grinding tools, and drilling tools under its own brand "Wanlong" are rich in varieties and specifications. Complete; suitable for cutting, grinding and drilling of construction and engineering materials such as stone, ceramics, cement, concrete, etc. It is sold well in 105 countries and regions in Europe, America, Asia, Africa, etc. with its sharp, durable, stable quality and high cost performance!