You are here: Home / Products / DIAMOND TOOLS / DIAMOND SAW BLADE / Cold Pressed Segmented Fast Cut Marble Diamond Saw Blade for Ceramic Tile
Share to:

Cold Pressed Segmented Fast Cut Marble Diamond Saw Blade for Ceramic Tile

Dry cutting blade
Quantity:
  • WANLONG

CONSTRUCTION SAW BLADE 

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade CONSTRUCTION SAW BLADE


Table 4 is the exchange relation between the blade diameter and RPM as well as the linear speed.

b) Cutting output and blade cutting depth and speed

The cutting output is also called as cutting efficiency. It is the blade cutting depth multiple feeding speed; that is, the area cut in single time unit, normally show as cm2/min or m2/h. 

The cutting depth affects the diamond saw blade’s life span, cutting efficiency, stress status and cutting quality. In General speaking, when the linear speed and requirement of cutting surface is,it is suggested to having small cutting depth and lower feeding speed. On the contrary, to use more cutting depth. Within allowance of the machine capacity, it should maximize the cutting depth for increase the cutting efficiency.


Technical Parameters

Diamond wire saw

Diameter(mm)

Segment Dimension

Born/mm

No.

105

20×1.8×7.5

16、20 22.23 25.4、50

8

115

20×1.8×8.0

16、20 22.23 25.4、50

9

125

20×2.0×8.0

16、20 22.23 25.4、50

10

150

20×2.0×7.5

16、20 22.23 25.4、50

10

180

20×2.2×8.0

16、20 22.23 25.4、50

14

200

20×2.2×8.0

16、20 22.23 25.4、50

14

230

20×2.4×8.0

16、20 22.23 25.4、50

16

250

20×2.4×8.0

16、20 22.23 25.4、50

18

300

20×2.6×8.0

16、20 22.23 25.4、50

22

350

20×2.8×8.0

16、20 22.23 25.4、50

24


Feeding speed affects the cutting output, blade load stress and the area for heat radiation during cutting etc. too much speed, the consumption of the segment will fast, the diamond drop early; too less speed, the consumption of the segment is slow, the diamond cannot open or get polished easily, make the cutting resistance more, taking more power and slow the cutting output. In general, to cut soft material like marble, it should using big cutting depth and slow feeding speed, it will help the cutting efficiency; to cut the fine grain granite, it should increase feeding speed to avoid the diamond get ground loosing sharpness; for the big grain granite with soft and hard constituent, it should using less cutting speed otherwise the blade vibrate and make diamond crush and then slow the cutting efficiency. To cut granite, it has linear speed of 9~12m/min normally. In machine operation, the feeding, return and out of the blade should be slow; 


Product display

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product displayDiamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product displayDiamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product displayDiamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Product display

 

 

Speed for cutting should be same. Through practice, for same cutting objective, to increase cutting depth and feeding speed, although this can increase the cutting output but he blade consumption is fast and then life span getting less; meantime, the power increase during cutting that cost big.



EXHIBITION

Customer Oriented,Honest and Highly Responsible Team  

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Exhibition 




Certification

Diamond Saw Blade for Concrete 14 Inch Diamond Saw Blade Certification 


Testimonial

 


I bought different blades and segments from "XX" and you, the 350mm blades bought from xxx(other supplier) falling off segments, however the segments we bought from you for our 3000mm blade are very good and we are happy with them, I will be putting in an order for more segments in two weeks time, I will definitely buy your blades, thank you for providing such good segments for us.


--Maci** from Poland


 


"Congratulations, after the evaluation of all the saw blade supplier, we are very happy with your quality. You will become our important supplier. Now, we ask you to specify the lead time of production for orders of 400 blades, send me the total price, invoice please."

--Lore** from Italy


"Mikayla and company, you have always been true and honorable to your word. It has been a pleasure dealing with you in this past year.

I look forward to many more years to come."


--Mr.Wall Canada


Related Articles

content is empty!

GET IN TOUCH