You are here: Home / Products / STONE MACHINERY / CNC Diamond Wire Saw Granite Marble Stone Cutting Machine

RELATED PRODUCTS

Share to:

CNC Diamond Wire Saw Granite Marble Stone Cutting Machine

Numerical Control Wire Saw
Quantity:
  • SJ-2000A
  • WANLONG

Make cutting easier!

Numerical Control Wire Saw Stone Machinery for Marble


Technical Parameters

1. SJ-2000A

Numerical Control Wire Saw

Model

Unit

SJ-2000A

Diameter of diamond wire

mm

Φ8.6-Φ10.8

Wire length

mm

14800

Main motor power

KW

7.5

Table dimensions(L×W)

mm

2000×1300

Max.cutting size(L×W×H)

mm

2000×2000×1500

Overall dimensions(L×W×H)

mm

6810×5354×3770

Water consumption

m³/h

6

Approximate weighe

kg

7500



CNC Panel

 Numerical Control Wire Saw Stone Machinery for Marble CNC Panel


PART OF WANLONG Stone Machinery Customers(Workshop)

Numerical Control Wire Saw Stone Machinery for Marble OF WANLONG Stone Machinery 


the cutting depth of the saw blade is large; the feeding is small; the processed material is hard and fine; the diamond has good quality and high concentration; the cutting depth of diamond particles into the rock is small; diamond particles are subjected to low impact and cutting force. In this case, the saw blade will have low cutting efficiency and long life macroscopically.



Detail Display

1、Scene processing

2、Computer controlled system

Numerical Control Wire Saw Stone Machinery for Marble Detail Display


Therefore, both the diamond and the anchoring agent should be modified. Meanwhile, it is essential to slow cutting speed, narrow cutting depth, and increase feeding, which can motivate the diamond to produce micro fractures and accelerate matrix wear, thus improve cutting efficiency.


 

EXHIBITION

Customer Oriented,Honest and Highly Responsible Team  

 机械描述下(新20_04


Usually, the crush & impact resistance of good quality diamond is better, wearing out slowly and little broken when cutting, so it is very suitable used for cutting strong abrasiveness material like:sandstone, concrete pavement, bituminous pavement, refractory material. In the mean time, Diamond should easy plating,Coarse grit, low Concentration, the bond bond should be high abrasiveness with strong holding force for diamond; the lower grade diamond, cuz the rush & impact resistance is relatively worse,is suitable for cutting easy-cutting material, and the grit should be fine, concentration should be higher, bond should be softer.


There is One thing should be pay special attention: for high temperature & wear-resisting bond, high grade diamond and hard cutting material, if you mix some low grade diamond, would decrease obviously the cutting efficiency and life.



 


Certification

Numerical Control Wire Saw Stone Machinery for Marble Exhibition


Related Articles

content is empty!

GET IN TOUCH