 |
| Quantity: | |
|---|---|
Make cutting easier!
Heavy duty structure, High precision laser, programmable system
Technical Parameters
1. Bridge Cutting machine
Model | Unit | QZQ-900 | QZQ-1200 |
Max. diameter of blade | mm
| Φ600-Φ900 | Φ1000-Φ1200 |
Main motor power | KW | 18.5 | 18.5 |
Blade vertical stroke | mm | 500 | 500 |
Table dimensions（L×W） | mm | 3000×1600 | 3000×1600 |
Table rotating degree | n° | 90° | 90° |
Max. cutting size (L×W×H) | mm | 3000×1600×300 | 3000×1600×450 |
Overall dimensions（L×W×H） | mm | 6000×5000×4200 | 6000×5000×4200 |
Water consumption | m3/h | 4 | 4 |
Approximate weight | Mm | 6000 | 6500 |
Cutting medium abrasive or medium hardness material like Ordinary marble,limestone, bluestone,soft granite(balsalt) and cutting hard and high density granite, it is suitable choose bronzed bond, cobalt bronze bond or Iron bronze bond, The bond should has higher abrasiveness , plastically and holing force for Diamond. The diamond surface should be rough, suitable for plating. The cutting parameter decided by hardness of cutting material. The high hardness would easy force to impactive cutting, so the cutting speed and cutting depth should not be too fast and too deep. But the feeding speed should be fast. When the hardness is not very high, the cutting speed should be fast, cutting depth should bigger.
Detail Display
1、screw rod lifting system(optional)
2、computer controlled system
3、laser device
4、ACCURATE SLICING
5、steel base(optional)
PART OF WANLONG Stone Machinery Customers(Workshop)
Diamond grit 30/35-60/70 is mostly used in blade. When cutting high abrasive material the grit should be coarse, cutting very hard,high density Granite and crisp glass, the grit should be fine.
Pre-Sales Service
1. Inquiry and consulting support.
2. View our Factory.
3. Visiting Local stone factories to see our machine performance
4. Visiting Local stone factories to see our machine performance
5. After-Sales Service
Dispatching Technician to Overseas for Machine installation and Traning how to operate the machine.
6. warantee 12 months
Packaging Shipping
Packge depends on the quanity and the product feature
sea worthy packaging, fully wrapped with waterproof membrane and air bubbles. 1 set with one 20ft container(20GP) or LCL
For high abrasive material like coarse quartz granite, sandstone, concrete and refractory brick …etc, requested the blade bond should be high abrasiveness, high hardness, lower plastically, higher diamond holding force, iron bond and WC bond is suitable. And it is suitable choose high quality diamond, good heat resistance, easy plating. Cutting high hardness and strong abrasiveness material, would force to impactive cutting ,so the cutting speed and cutting depth should not be too fast and too deep.
EXHIBITION
Customer Oriented,Honest and Highly Responsible Team
But the feeding speed should be fast. To the contrary, cutting lower hardness and strong abrasiveness material, cutting speed should be fast, big cutting depth and slow feeding speed., in thisway would validly keep the cutting efficiency and reduce the wearing of the bond and diamond, avoid diamond falling out.
Certification
Therefore, in addition to adjusting the diamond and the anchoring agent, it is necessary to increase cutting speed, enlarge cutting depth and decrease feeding for reducing the crush and shedding of the diamond, as well as the wear of the anchoring agent. This method can enhance cutting efficiency and prolong the lifespan. By contrast, when the diamond has excessive wear resistance, the stone will be ground into a flat or smooth arc surface, and it is hard to produce micro crushing, which means that the anchoring agent matrix is over wear-resistant or it has too much control of the diamond; the cutting depth of the saw blade is large; the feeding is small; the processed material is hard and fine;
Usually, the crush & impact resistance of good quality diamond is better, wearing out slowly and little broken when cutting, so it is very suitable used for cutting strong abrasiveness material like:sandstone, concrete pavement, bituminous pavement, refractory material. In the mean time, Diamond should easy plating,Coarse grit, low Concentration, the bond bond should be high abrasiveness with strong holding force for diamond; the lower grade diamond, cuz the rush & impact resistance is relatively worse,is suitable for cutting easy-cutting material, and the grit should be fine, concentration should be higher, bond should be softer.
Make cutting easier!
Heavy duty structure, High precision laser, programmable system
Technical Parameters
1. Bridge Cutting machine
Model | Unit | QZQ-900 | QZQ-1200 |
Max. diameter of blade | mm
| Φ600-Φ900 | Φ1000-Φ1200 |
Main motor power | KW | 18.5 | 18.5 |
Blade vertical stroke | mm | 500 | 500 |
Table dimensions（L×W） | mm | 3000×1600 | 3000×1600 |
Table rotating degree | n° | 90° | 90° |
Max. cutting size (L×W×H) | mm | 3000×1600×300 | 3000×1600×450 |
Overall dimensions（L×W×H） | mm | 6000×5000×4200 | 6000×5000×4200 |
Water consumption | m3/h | 4 | 4 |
Approximate weight | Mm | 6000 | 6500 |
Cutting medium abrasive or medium hardness material like Ordinary marble,limestone, bluestone,soft granite(balsalt) and cutting hard and high density granite, it is suitable choose bronzed bond, cobalt bronze bond or Iron bronze bond, The bond should has higher abrasiveness , plastically and holing force for Diamond. The diamond surface should be rough, suitable for plating. The cutting parameter decided by hardness of cutting material. The high hardness would easy force to impactive cutting, so the cutting speed and cutting depth should not be too fast and too deep. But the feeding speed should be fast. When the hardness is not very high, the cutting speed should be fast, cutting depth should bigger.
Detail Display
1、screw rod lifting system(optional)
2、computer controlled system
3、laser device
4、ACCURATE SLICING
5、steel base(optional)
PART OF WANLONG Stone Machinery Customers(Workshop)
Diamond grit 30/35-60/70 is mostly used in blade. When cutting high abrasive material the grit should be coarse, cutting very hard,high density Granite and crisp glass, the grit should be fine.
Pre-Sales Service
1. Inquiry and consulting support.
2. View our Factory.
3. Visiting Local stone factories to see our machine performance
4. Visiting Local stone factories to see our machine performance
5. After-Sales Service
Dispatching Technician to Overseas for Machine installation and Traning how to operate the machine.
6. warantee 12 months
Packaging Shipping
Packge depends on the quanity and the product feature
sea worthy packaging, fully wrapped with waterproof membrane and air bubbles. 1 set with one 20ft container(20GP) or LCL
For high abrasive material like coarse quartz granite, sandstone, concrete and refractory brick …etc, requested the blade bond should be high abrasiveness, high hardness, lower plastically, higher diamond holding force, iron bond and WC bond is suitable. And it is suitable choose high quality diamond, good heat resistance, easy plating. Cutting high hardness and strong abrasiveness material, would force to impactive cutting ,so the cutting speed and cutting depth should not be too fast and too deep.
EXHIBITION
Customer Oriented,Honest and Highly Responsible Team
But the feeding speed should be fast. To the contrary, cutting lower hardness and strong abrasiveness material, cutting speed should be fast, big cutting depth and slow feeding speed., in thisway would validly keep the cutting efficiency and reduce the wearing of the bond and diamond, avoid diamond falling out.
Certification
Therefore, in addition to adjusting the diamond and the anchoring agent, it is necessary to increase cutting speed, enlarge cutting depth and decrease feeding for reducing the crush and shedding of the diamond, as well as the wear of the anchoring agent. This method can enhance cutting efficiency and prolong the lifespan. By contrast, when the diamond has excessive wear resistance, the stone will be ground into a flat or smooth arc surface, and it is hard to produce micro crushing, which means that the anchoring agent matrix is over wear-resistant or it has too much control of the diamond; the cutting depth of the saw blade is large; the feeding is small; the processed material is hard and fine;
Usually, the crush & impact resistance of good quality diamond is better, wearing out slowly and little broken when cutting, so it is very suitable used for cutting strong abrasiveness material like:sandstone, concrete pavement, bituminous pavement, refractory material. In the mean time, Diamond should easy plating,Coarse grit, low Concentration, the bond bond should be high abrasiveness with strong holding force for diamond; the lower grade diamond, cuz the rush & impact resistance is relatively worse,is suitable for cutting easy-cutting material, and the grit should be fine, concentration should be higher, bond should be softer.
